Wrist Strap Tester Unit
This will test Wrist Bands - Footwear
WST-1 = Wrist Band Tester Only
WST-2 = Wrist Band Tester & Wall Plate
WST-3 = Wrist Band Tester - Walll Plater & Foot Plate and all Connecting Cords
When testing, the operator simply connects to the test via the 4 mm banana plug socket. To test make
finger contact with the stainless push button, and “press to test”. A green LED will illuminate for pass or
the red LED will illuminate for fail. An audible buzzer will sound if the red fail LED illuminates. If the
resistance through the coil cord wrist band and person exceeds 35 meg ohms the red fail LED will light, if
the resistance is below 750 kilohms the red fail LED will light. If the 9 volt PP3 battery falls below 6.5 volts
during test the yellow battery low LED will light.
The product is CE approved.
Static Control Products Limited has 1000's of stock bags (Static Shielding - Open Top - Zip Top - Moisture Barrier Bags) available for a next day delivery.